To Change The Lock Cancellation Code; To Reset The Lock Cancellation Code - Mitsubishi Galant Owner's Manual

Comfort controls

To change the lock cancellation code

It is possible to change the code for lock cancellation to any
desired number.
1. Push the AUDIO switch (6) for at least about 2 seconds to
select the MENU mode. Then select the LOCK setting
mode.
2. In the LOCK setting mode, turn the AUDIO switch (6) to
select "CODE EDIT".
3. Push the AUDIO switch (6). The code entry window will
display.
4. Use the memory select buttons (7) to enter the current
code (the code prior to the change).
5. If you entered the correct code, the code entry window
will again be shown. Enter your desired code.
If you entered an incorrect code, a warning sound will be
emitted and "CODE E" will be displayed. Then, the code
entry window will again be shown. You can retry the code
entry any number of times.
5
6. After entering the new code, push the AUDIO switch (6).
The code entry window will again be shown for confirma-
tion. Enter the new code again, then push the AUDIO
switch (6).
7. The code will be changed, and the system will return to
the LOCK setting mode.
NOTE
The code is stored in memory. If a battery cable is discon-
nected, such settings will be erased. (The code will return
to the "1111" that was set at the factory.)
5-52

To reset the lock cancellation code

N00701800057
In case you forget the code, it is possible to reset the code to the
"1111" that was set at the factory.
1. With the audio power OFF, push the PWR switch (1) and
AUDIO switch (6) simultaneously. The display will show
"CODE INITIAL".
2. Push the AUDIO switch (6). The display will show
"YES". If you wish to reset the code, push the AUDIO
switch (6) again. If you do not wish to reset the code, turn
the AUDIO switch (6) so the display shows "CANCEL"
and then push the AUDIO switch (6) again.
N00701900045