Chapter 1 Basic Knowledge Of The Pnc-1050; Outline Of The Pnc-1050 - Roland Sign Maker CAMM-1 PNC-1050 User Manual

Chapter 1 Basic Knowledge of the PNC-1050

1.1 Outline of the PNC-1050

Exclusive Sprocket Cutting Machine
The PNC-1050 is a 15"-width sprocket type exclusive cutting machine.
Intelligent CAMM-GL III Instruction System (mode 1 and mode 2)
CAMM-GL III (mode 1 and mode 2) is built in as the instruction set for the PNC-1050.
Automatic instruction set recognition function
The instruction system is determined automatically.
High-speed 200 mm/sec Operation
A maximum cutting speed of 200 mm/sec (in all directions) ensures highspeed operation.
Wide Cutting Area
The area where cutting can be performed is 335 mm
1050.
Smoothing Function
The carriage moves smoothly when cutting circles and curves, making possible quick, attractive cutting.
High Resolution
The software resolution of 0.025 mm/step and the hardware resolution of 0.003125 mm/step (micro-step
control) assure high overall resolution.
Automatic Interface recognition
The interface connected to the computer (parallel or serial) is determined automatically.
Cutting Matched to Sheet Thickness
To reduce the load on the blade when cutting thick sheets, cutting conditions matched to the thickness
can be set via the control panel.
Soft Landing Function
This function gently raises and lowers the cutter, protecting the blade.
Settings stored in Memory
The current configuration, as made by settings on the panel, is memorized, and is retained even while
power is off. This eliminates the need for redoing the same group of settings.
User Registration Function
You can label and register up to four sets of frequently used conditions in the display menu ([SELECT
USER DFLT]).
×
24998 mm ( 13-1/8"
3
×
984-1/8") for the PNC-