Printing and Cutting Positions
Manual-cutter position
Autocutter blade position
Center of the print dotline
The values above may vary slightly as a result of paper slack or variations in the paper. Take the
notice into account when setting the cutting position of the autocutter.
Paper Specifications
Paper types
Form
Size
Roll paper diameter
Roll paper spool
Roll width when taken up
Paper width
Specified roll paper type
Specified original paper type
88
Approx. 13
[units: mm (All the numeric values are typical.)]
80 mm width paper
printing
Specified thermal paper
Roll paper
83 mm {3.27"} maximum
Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
80 + 0.5/-1.0 mm
79.5 ± 0.5 mm
NTP080-80
TF50KS-E, TF60KS-E (NIPPON Paper Industries Co., Ltd.)
PD160R, PD190R (OJI Paper Mfg. Co., Ltd.)
P220AGB-1 (Mitsubishi Paper Mills Limited.)
P300, P310, P350 (Kanzaki Specialty Papers)
AF50KS-E (Jujo Thermal Oy)
F5041 (Mitsubishi HiTec)
KT55F20, KT48F20 (Koehler Paper Group)
Approx. 30
Paper feed direction
58 mm width paper
printing
58 + 0.5/-1.0 mm
57.5 ± 0.5 mm
NTP058-80