For Lan Interface - Epson TM-T70II Technical Reference Manual

For LAN Interface

Connect the printer to a network by a LAN cable via a hub.
For the setting method of the IP address, see the Technical Reference Guide for the interface board.
LAN interface connection diagram
TM-T70II
A customer display (DM-D series) cannot be connected to the printer when the printer is
connected to the host computer. To connect the customer display, connect the printer to the
host computer via the serial interface or the USB interface.
Connecting the LAN interface cable
• When LAN cables are installed outdoors, make sure devices without proper surge
protection are cushioned by being connected through devices that do have surge
protection.
CAUTION
Otherwise, the devices can be damaged by lightning.
• Never attempt to connect the customer display cable, drawer kick-out cable, or the
standard telephone line cable to the LAN connector.
Connect a 10BASE-T/100BASE-TX cable to the LAN connector by pressing firmly until the connector clicks
into place.
DM-D
10BASE-T/100BASE-TX
Modular cable
Cash drawer
Chapter 2 Setup
TM-T70II
2
29