Bartscher Aurora 22 Manual page 18


Wipe the device's casing with a moist cloth and wipe dry with a soft cloth.

Plug the device into a single grounded socket.

The coffee machine is ready for use.
Preparation of coffee
1. Fill the water tank with cold fresh drinking water
in appropriate amount, max. 2 litres. The minimum
amount necessary for brewing coffee is 0.5 litre.
CAUTION
Fill the water tank only with fresh drinking
water. Never pour sugar, coffee, tea or milk
into the opening for filling the coffee machine.
2. Remove the filter basket with insert and place
the proper paper basket filter from Bartscher
(Code-No.: 190014 or 190015250).
3. Add a proper amount of ground coffee into paper
basket filter. Use 35 to 50 g of coffee per one litre
of water, in accordance with your preferences.
4. Place the filter basket with insert in the guides and
slide it all the way to the rear until it "clicks" into place.
5. Open the cover of the thermo pump jug and remove the pump's tube. Open the
thermo pump jug's cover to the side and place the open thermo jug on the bottom
plate, in such a manner that the thermo pump jug opening is located below the drip
opening of the filter basket.
6. Turn the device using ON/OFF rocker switch. The red power indicator light in the
ON/OFF rocker switch light comes on.
7. Green heating indicator light comes on and the brewing process starts. After a short
time, the hot coffee will start flowing into the thermo jug.
8. When the brewing process is finished, the coffee machine automatically turns itself
off and the orange heating indicator light goes off. The coffee is ready to be served.
- 37 -