Addition Of Volumes - Powerfix Profi 40111 Operation And Safety Notes

5. Press the READ button to measure the height.
The measured height appears in the upper
row of the display. The results of the volume
calculation appear in the lower row.

Addition of volumes

1. Measure a volume as described in the section
„Measuring volumes".
2. Press the M button
appears in the display
volume is saved.
3. Press the MODE button
now ready for the second measurement.
4. Measure the next volume.
5. Press the + / = button
appears in the display.
6. Press the RM button
measurement is shown in the lower row of the
display.
7. Press the + / = button again. Both measure-
ments are added and the result is shown in
the lower row of the display.
8. Repeat steps 2 to 7 to add further measure-
ments.
9. Press the MODE button to leave the addition
mode. All the measurements will be deleted.
. The message „M+"
7
. The measured
2
. The appliance is
4
. The message „+"
12
. The result of the first
10
GB 21