Advertisement
B: Wear the material holder tray on steel roller, fix the square metal and steel roller with 10 pcs M4*10 cross screw
onto stander(each side 5 pcs screw),Install it well so as to material feeding can be controlled well when printing.
3.3.2，Installation of fans.
Fix the fan on stander with 6 pcs M5*10 cross screw(each side 3 pcs screw) See illustration below:
Overall view of printer stander ：
3.4. Installation of body (printing part)
Remove the
Buffer foam and dustproof plastic wrap
with 4 pcs M5*20 cross screw
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:sales@titanjet.com.cn
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
http://www.titanjet.com.cn
after unpack, put on stander in right position by forklift and fix
- 8 -
Advertisement
