Advertisement
8.2 Click cleaning button
working like this: the ink pump will pumping the waste ink in ink station with click cleaning button, and carriage
move to home place and print head move close to capping, ink pump sucking ink from print head for 10 seconds,
the wiper move out while the carriage will move back and print head spray out ink, the wiper should be 0.5-1mm
higher than print head.
8.3、Adjust the distance between print head and media of TITANJET 1901/1902 PRINTER
According to different printing media thickness, adjust the carriage height, the ideal distance between print
head and media is 1mm,to avoid print head scratch the media and damage the printed picture, you'd better to
adjust the carriage height, but max distance not exceed 2.5mm.the method to adjust the height of carriage is to
tighten or loose the screw on the carriage, see the following picture.
（Attention, For print head safety, before installing, use Maintop to RIP a picture with 1.5X1M and printing to
make sure the machinery works well, then install the print head!! ）
8.4、feeding of ink
Attentions：
8.4.1、Keep ink out of the reach of children;
8.4.2、Washing with fresh water if ink splash into eye
8.4.3、to clean ink tube, use the solvent along with the printer
8.4.4、suggested ink temperature between 18℃ to 30℃
8.4.5、store the ink at a cool, room temperature place, avoid to exposure ink to hot, cold place and sunlight
8.4.6、use the ink after open,
8.4.7、if ink freeze, move to normal temperature place for dissolving for several hours。
8.4.8、washing your hands or clothes if ink splashed on hands or clothes
8.4.9、Don't try to disassembly ink box
8.4.10、 ink is chemical product. for better environment, kindly disposal the empty ink bottle, damaged ink tank
and waste ink
8.4.11、don't remove dampers while feeding ink
8.4.12、use the ink specified, don't mix use with others
8.4.13、don't shaking the bottle while feeding ink, feeding ink slowly while printer stopped working to avoid
air bubble generated
Feeding ink into ink tank and put into ink tank holder
Attention：the correct ink tank order is
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:sales@titanjet.com.cn
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
, to check carriage, ink pump and wiper works well or not. It should be
：Y1
M1
C1
K1 K2
http://www.titanjet.com.cn
C2
M2
Y2
- 38 -
Advertisement
