Advertisement
L、One Key Adjust
M: Exit：Exit control software
4、Printing job List Menu
Show you the current file name, status, print mode, size, path and so on
5、Usually parameter setting
A、Margin：
a、Zero to Paper：setup the margin according to position of material loaded by user
b、Paper Margin：Start printing distance to material edge
B、Print Direction：
a、Single direction：Printing while carriage move to left direction, won't printing while move to right direction,
b、Double direction：Printing while carriage move to left and right direction
C、Color Bar Setting：
a、Position：you can choose NO Color Bar or printing on left or right side
b、Width：Color Bar width while printing Color Bar
c、To Pic：Distance from Color Bar to the picture to be Printed
D、Flash Frequency：
To avoid the nozzle been blocked and dried, also in order to keeping the nozzle in good spray status, you can choose the
reasonable flash frequency to wet the nozzle when the printer is turn on but not running for printing. at the same time,
the carriage will stay at home place.
E、Stepping setting：
a、Stepping Number：How many mm that the printer printing 1 pass, different pass matches
different stepping number(stepping number will mention in the following text)
b、Feather：feather function armed，this can avoid the pass banding. Printing with feather mode is suggested
F：Apply（save）
Remember to click apply button after all parameters been setup, otherwise you've done a blank job.
6、Status Bar
You can get information about what time the printing was started, what time was finished and delivery
information of the main board and software, feedback information of Raster.
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:sales@titanjet.com.cn
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
http://www.titanjet.com.cn
- 30 -
Advertisement
