Advertisement
http://www.titanjet.com.cn
2） 、If you get the following image,you need to adjust the 4 screws of picture 3（tighten screw 1 and 2,adjust
screw 3 and 4 to change the print head position.
Picture 3
3)stepping adjust is the same as 1901
7.4、Other Parameter setting
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:sales@titanjet.com.cn
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
- 34 -
Advertisement
