Advertisement
incorrect, move up or down the black plastic wrench to adjust(on the right side of the carriage)
The red line and blue line will keep alignment through move up of move down the wrench
7.2.3、Two-way Adjust：see details in 7.1.4
7.2.4、Stepping Adjust：
Pic 1: First time printing
Click Stepping Adjust, printer will printing two times, first time will printing 5 short lines, second time only
one lines, and is longer than first time. If the longer line completely matched the middle line of first printing, it
means the stepping is accurate. See above illustration Pic 2
If the longer line locates the up side of the middle line, it means you should add the stepping value. See the
following picture
If the longer line locates the down side of the middle line, it means you should reduce the stepping value.
See the following picture
You have to adjust the stepping according to the situation when you use the printer, to make sure the longer
line printed at the second time match the middle line of first time printing
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:sales@titanjet.com.cn
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
http://www.titanjet.com.cn
Pic 2: Second time printing
- 32 -
Advertisement
