Advertisement
Move Down: Material move forward button
3. Installation of Titan-jet 1901/1902 water base & eco-solvent piezo printer
Installation steps after unpacking：
3.1：unpacking: Remove the
Attention：Check carefully to confirm no spare parts lost!!！
3.2：installing the stand
Take out 2 stander, stabilize beam。
with 8pcs M5*10 cross screw.(See illustration)
Installation illustration of Stander and Square stabilize beam
3.3 Installation of material holder and fans
3.3.1. Installation of material holder
A: Fix the material holder on standers with 16 pcs M4*10 cross screw(each side 8 pcs screw)。
Tel：+86-760-88667089 / 88667090
Fax：+86-760-88667096
Web: http://www.titanjet.com.cn
email:sales@titanjet.com.cn
Add：No.6-2,Jin Hua Zhong Road,Zhongshan City,Guangdong,China
Buffer foam and dustproof plastic wrap
to fix
stander with 10pcs M6*10
http://www.titanjet.com.cn
after unpack, take out of all spare parts, check
inner hexagon
screw。 Fix the Square stabilize beam on the stander
- 7 -
Advertisement
