Operation Procedure - NSK Ultimate XL Operation Manual

3. Operation Procedure

1. Connect Power Cord to a wall outlet.
16
2. Make sure that 12 Speed Control Knob is at the lowest speed position.
4
3. Turn Power Switch ON (Green Power Lamp will light). The preset rotation speed will
appear on the Indicator.
4. Select the rotation direction with
is pressed, the direction changes between FORWARD and REVERSE.
5. Select the control method with
pressed, the method changes between the HAND and FOOT.
Operation - 1
HAND Operation
6. Select HAND with
7. Preset the rotation speed with
Speed Display.
8. Press 9 Motor Switch, and the motor will run.
9. To stop the motor, press
Operation - 2
Operation by Foot Pedal
6. Select FOOT with
7. Preset the maximum rotation speed with
on the Speed Display.
3
8. Depress Foot Pedal, and the motor will run. The rotation speed can be variably
controlled within the preset maximum rotation speed range according to the amount of
3
depressing Foot Pedal.
Auto speed mechanism
To Fix the speed within the rotation speed range set by the volume, press
while the motor is running at the desired speed. The display lamp will flash and the rotation
speed can be maintained even if
Switch again or depress
7
Forward/Reverse Selector Switch. Each time this switch
8
Hand/Foot Selector Switch. Each time this switch is
8
Hand/Foot Selector Switch.
12
Speed Control Knob with checking the speed on the
9 Motor Switch again.
8 Hand/Foot Selector Switch.
3
Foot Pedal is released. To cancel it, press
3
Foot Pedal again.
12
Speed Control Knob with checking the speed
7
9
Motor Switch
9
Motor