Handpiece Stand; Handpiece Holder; Specification - NSK Ultimate XL Operation Manual

12. Handpiece Stand

At the bottom of the handpiece stand, tools
necessary for handpiece maintenance and a
spare chuck (optional) can be mounted.
(Fig. 14)

13. Handpiece Holder

The handpiece holder that can be mounted on
the right side of the control unit will widen a your
effective work area. Insert the holder into the slot
and fasten the screw. Adjust the holder angle to
your best position. (Fig. 15)
14. Specification
Control Unit
NE213-G (Gray)
Model
NE213-W (White)
AC120V 50/60 Hz 46VA
Power supply
AC230V 50/60 Hz 46VA
Rated Power 46VA
Weight 2.8kg
Dimensions W167 x D247 x H77mm
Motor Handpiece
1 ) Torque Type
Model UMXL-T(P) / UMXL-T(P) 2M
1,000 ~ 50,000 min
Speed
Max. Torque 8.7N · cm
Weight 215g ( exclude the cord)
Dimensions L151 x ø 29mm
Cord Length 1.2m / 2.0m
Handpiece Holder
Food Pedal
Model
Weight
Handpiece
Model
Weight
2 ) Compact Type
Model
-1
Speed
Max. Torque
Weight
Dimensions
Cord Length
14
FC-64
460g
Handpiece Stand
120g
UMXL-C/ UMXL-C 2M
1,000 ~ 50,000 min
6 N · cm
181g ( exclude the cord)
L144 x ø 27mm
1.2m / 2.0m
Fig.14
Fig.15
-1