Set Up Of Control Unit; Operation Procedure - NSK ULTIMATE XL Operation Manual

2. Set up of Control Unit

1. Mounting of Motor
5
Insert the motor cord plug locator into
Connector aligning it with the groove of the
connector, and tighten the motor cord plug nut
to fix. (Fig. 1)
2. Mounting of Foot Pedal
Insert the Foot Pedal cord plug locator into
14
Foot Pedal Connector aligning it with the
groove of the connector. (Fig. 2)
3. Connecting of Power Cord
Securely insert the plug of 16 Power Cord into
connector at the back of the unit aligning it with
the configuration. (Fig. 3)
Motor
6

3. Operation Procedure

1. 16 Connect Power Cord to a wall outlet.
2. Make sure that 12
3. Turn 4 Power Switch ON (Green Power Lamp will light). The preset rotation speed will
appear on the Indicator.
4. Select the rotation direction with
is pressed, the direction changes between FORWARD and REVERSE.
5. Select the control method with
pressed, the method changes between the HAND and FOOT.
Fig.1
Operation - 1
HAND Operation
6. Select HAND with
7. Preset the rotation speed with
Speed Display.
8. Press 9 Motor Switch, and the motor will run.
9. To stop the motor, press
Fig.2
Operation - 2
Operation by Foot Pedal
6. Select FOOT with
7. Preset the maximum rotation speed with
on the Speed Display.
8. Depress 3 Foot Pedal, and the motor will run. The rotation speed can be variably
controlled within the preset maximum rotation speed range according to the amount of
depressing 3
Fig.3
Auto speed mechanism
To Fix the speed within the rotation speed range set by the volume, press
while the motor is running at the desired speed. The display lamp will flash and the rotation
speed can be maintained even if
Switch again or depress
Speed Control Knob is at the lowest speed position.
7 Forward/Reverse Selector Switch. Each time this switch
8 Hand/Foot Selector Switch. Each time this switch is
8 Hand/Foot Selector Switch.
12 Speed Control Knob with checking the speed on the
9 Motor Switch again.
8 Hand/Foot Selector Switch.
12 Speed Control Knob with checking the speed
Foot Pedal.
3 Foot Pedal is released. To cancel it, press
3
Foot Pedal again.
7
9 Motor Switch
9 Motor