Zte ZXSDR R8872A Manual page 10

ZXSDR R8872A Hardware Replacement
Figure 2-1 Removing the Grounding Cable
3. Connect a new grounding cable. For detailed operations, refer to the ZXSDR R8872A
Macro Remote Radio Unit Hardware Installation.
4. Close the external power supply switch, and then observe whether power-related
indicators on the equipment are in proper statuses.
indicator statuses, refer to the ZXSDR R8872A Macro Remote Radio Unit Hardware
Description.
l Yes → Power supply is normal. Go to the next step.
l No → Troubleshoot the fault and connect the power cable again, or contact ZTE
technical support.
5. Handle the faulty cable.
a. Put the faulty cable into a moisture-proof antistatic bag, mark the cable type and
fault information on a label, and then stick the label on the bag.
b. Put the bag containing the faulty cable into a carton, and stick the same label on
the carton, providing necessary information for cable repair.
c. Contact the local office of ZTE for handling the faulty cable.
– End of Steps –
SJ-20141127113509-004|2014-11-17 (R1.0)
2-2
ZTE Proprietary and Confidential
For the description about