Mallinckrodt INOmax DSIR Pocket Manual page 54

Changing INOMAX
Cylinders
may activate the "Two Cylinders
Open" alarm until the empty
Note: If using the INOmax DS
Transport Regulator/Cap
Assembly, transfer the cap from
the exhausted INOMAX cylinder
to the new INOMAX cylinder
at this time; the "Cylinder Not
Detected" alarm may occur.
F. Close the cylinder valve on the
empty cylinder and remove
the hose from the back of the
INOmax DS .
IR
G. Depressurize and remove the regulator from the
empty cylinder.
Part No. 20751 Rev-01
2014-08
IR
54