Advertisement
1
PRECAUTIONS
In the interest of safety, please observe the following precautions.
INSTALLATION LOCATIONS
SUITABLE LOCATIONS
Avoid shaky places or hot-springs areas where hydrogen
sulfide and acidic ions are likely to be generated.
AVOID PLACES WITH HIGH HUMIDITY AND DUST
Do not place the unit at locations with high humidity and/
or dust. They can cause extensive damage. Avoid places
where the unit is likely to contact oily fumes and vapors.
SAFETY TECHNICAL CHECKS
Periods:
According to the recommendations of the manufacturer of medical device.
Scope:
a) Visual check
Housing, cables, operator controls, readout device (displays, LED etc.), labels,
accessories, instruction manual.
b) Function test
Performance check acc. instruction manual, also unity and applicability of set
and accessory test.
c) Electrical check
Safety electrical test of the configuration in accordance with EN60601-1.
" In the interest of safety, avoid the handling of liquids beside the set."
RESPONSIBILITY OF THE MANUFACTURER
The manufacturer, assembler, installer or importer considers himself responsible for the effects on
safety, reliability and performance of the EQUIPMENT only if:
– assembly operations, extensions, re-adjustments, modifications or repairs are carried out by persons
authorized by him, and
– the electrical installation of the relevant room complies with the IEC requirements
– the EQUIPMENT is used in accordance with the instructions for use.
•
Any service after expiration of the warranty period will be chargeable. Consult your dealer for
advice.
AVOID PLACES LIKELY TO BE EXTREMELY HOT
Places exposed to direct sunlight, or near heating
appliances can attain extremely high temperatures,
which may deform the cabinet, or can become a prime
cause of damage.
1
Advertisement
