Britax ONE4LIFE CLICKTIGHT Series User Manual page 44

6. Position the harness
straps around the child.
NOTE: Remove bulky
coats and/or jackets
before putting the child in
the child restraint.
7. Fasten the buckle.
Proper connection is
confirmed with a click
after inserting each
buckle tongue.
8. Check the proper
harness height and pull
any excess slack up to
the child's shoulder area
before tightening.
9. Pull the harness adjuster
strap to tighten the
harness.
NOTE: The harness
should have a snug fit
around the child. A snug
strap should not allow any
slack. It lies in a relatively
straight line without
sagging. It does not press
on the child's flesh or
push the child's body into
an unnatural position.
You should not be able to
pinch excess webbing.
10. Fasten the chest clip
and place at armpit level.
Before traveling, verify that the:
9 Harness straps are not twisted.
9 Harness is snug.
9 Buckle is fastened.
9 Chest clip is at the child's armpit level.
9 Bulky coats and jackets are removed.
42