Vehicle Lap Belt Only - Britax ONE4LIFE CLICKTIGHT Series User Manual

FORWARD-Facing Installation with Vehicle Lap
Belt Only
1. Extend the top tether
strap by lifting on the top
tether adjuster.
2. Unhook the top tether
hook from the back of
the child restraint and
place it up and over the
seatback.
3. Recline child restraint to
the appropriate position.
Refer to page 15 to
determine appropriate
recline position.
4. Place child restraint
FORWARD-facing on
the vehicle seat so that
bottom of the base sits
flat on the vehicle seat.
5. Ensure that no more than
3 in (7.6 cm) of the base
hangs over the front edge
of the vehicle seat.
6. Open the CLICKTIGHT
door. Squeeze the
CLICKTIGHT release
buttons underneath the
front cover flap and lift to
open.
34
3"