Britax ONE4LIFE CLICKTIGHT Series User Manual page 35

13. Ensure both CLICKTIGHT
release buttons are
visible.
NOTE: If it is difficult
to close, you may have
removed too much slack.
14. Connect the top tether
hook to the vehicle's top
tether anchor (check the
vehicle owner's manual
for location).
15. Pull the top tether strap
to remove slack and
secure excess webbing
with the elastic band
attached.
NOTE: Do NOT install by this method for a child weighing
more than 35 lb (15.9
9 Both red CLICKTIGHT release buttons are visible after installation.
9 All connections are secure and strap is not twisted.
9 Base of child restraint sits flat on vehicle sit.
9 Recline indicator is still within the correct section for FORWARD-
facing, after securing the child.
9 Child restraint cannot be moved front to back or side to side more
than 1 in. (2.5 cm) at the belt path.
9 Excess top tether webbing is contained within your vehicle and
secured.
NOTE: If the child restraint does not meet the above
criteria, repeat the installation steps or use a different
seating location in your vehicle.
ADJUSTMENT
SLOT
kg).
33