Britax ONE4LIFE CLICKTIGHT Series User Manual page 34

6. Recline child restraint to
the appropriate position.
Refer to page 15 to
determine appropriate
recline position.
7. Place child restraint
FORWARD-facing on the
vehicle seat so that the
bottom of the base sits
flat on the vehicle seat.
8. Ensure that no more than
3 in (7.6 cm) of the base
hangs over the front edge
of the vehicle seat.
9. Route the lower
connector strap through
the FORWARD-facing
belt path marked by
green labels.
10. Firmly press lower
connectors onto their
adjacent anchors until a
click is heard.
11. Ensure the connector
strap is not twisted. Pull
the end of the lower
connector strap to remove
slack.
12. Close the CLICKTIGHT
door over the lower
connector strap.
32
3"
ADJUSTMENT
SLOT