Britax ONE4LIFE CLICKTIGHT Series User Manual page 38

12. Connect the top tether
hook to the vehicle's top
tether anchor (check the
vehicle owner's manual
for location).
13. Pull the top tether strap
to remove slack and
secure excess webbing
with the elastic band
attached.
9 Both red CLICKTIGHT release buttons are visible after installation.
9 All connections are secure and vehicle belt is not twisted.
9 Vehicle belt is locked as directed by your vehicle owner's manual.
9 Base of child restraint sits flat on vehicle seat.
9 Recline indicator is still within the correct section for FORWARD-
facing, after child is secured.
9 Child restraint cannot be moved front to back or side to side more
than 1 in. (2.5 cm) at the belt path.
9 Excess top tether webbing is contained within your vehicle and
secured.
NOTE: If the child restraint does not meet the above
criteria, repeat the installation steps or use a different
seating location in your vehicle.
36