Table of Contents
Advertisement
1.4 Configuration via PC
The WGSMSC is primarily configured via PC-USB connection with the included configuration software. The communicator can
also be re-configured to an extent by SMS commands after initial setup is complete.
1.4.1 Connecting the WGSMSC to the PC
1.
Power on the WGSMSC with the included adapter and connect it to the
PC via the included USB cable.
2.
Insert the included CD-ROM and copy GSM 3G 4G Ethernet
CommunicatorK5SV1.1.exe from the .zip onto the PC.
3.
Launch the program. It will open to the Basic Information tab by
default.
4.
At the top right of the configuration software, select a Com Port (eg. COM1) and press "Open Com" to confirm.
1.4.2 Password Settings
1. Change the default SMS password, under "K5 Password". For future
reference, write down this password in the provided box, as it is
necessary for configuration via SMS.
2.
If the SIM card being used for your WGSMSC has a PIN security code,
enter that under "Simcard PIN Code".
3.
Account Number isn't important for now and can be left as it is.
SMS Password
Visit
www.watchguardsystems.com
Fig. 1.4.1: WGSMSC Configuration Software - Basic Information Tab
3
Advertisement
Table of Contents
