Table of Contents
Advertisement
4
Remove the memory card.
Appendix
Registering Your Device with Garmin
Express
NOTE: You should use the ActiveCaptain app to register the
device
(Getting Started with the ActiveCaptain App, page
Help us better support you by completing our online registration
today. Keep the original sales receipt, or a photocopy, in a safe
place.
1
Insert a memory card into the card slot
Cards, page
2).
2
Wait a few moments.
The chartplotter opens the card management page and
creates a file named GarminDevice.xml in the Garmin folder
on the memory card.
3
Remove the memory card.
4
Insert the memory card into your computer.
5
On your computer, go to garmin.com/express.
6
Follow the on-screen instructions to download, install, and
open the Garmin Express application.
7
Select
> Add a Device.
8
While the application searches, select Sign In next to Have
marine charts or devices? near the bottom of the screen.
9
Create or sign in to your Garmin account.
10
Follow the on-screen instructions to set up your vessel.
11
Select
> Add.
The Garmin Express application searches the memory card
for the device information.
12
Select Add Device to register the device.
When registration is complete, the Garmin Express
application searches for additional charts and chart updates
for your device.
When you add devices to the chartplotter network, repeat these
steps to register the new devices.
Software Update
NOTE: You can use the ActiveCaptain app to update the device
software
(Updating Software with the ActiveCaptain App,
page
6).
You may need to update the device software when you install
the device or add an accessory to the device.
This device supports up to a 32 GB memory card, formatted to
FAT32.
Before you update the software, you can check to the software
version installed on your device
Information, page
54). Then, you can go to
/software/marine.html, select See All Devices in this Bundle, and
compare the installed software version to the software version
listed for your product.
If the software on your device is older than the one listed on the
website, follow the steps to load the software on a memory card
(Loading the New Software on a Memory Card, page
then update the device software
page
60).
Loading the New Software on a Memory Card
You can copy the software update to a memory card using a
computer that is running Windows
1
Insert a memory card into the card slot on the computer.
2
Go to garmin.com/support/software/marine.html.
60
5).
(Inserting Memory
(Viewing System Software
garmin.com/support
60), and
(Updating the Device Software,
software or a Mac
computer.
®
®
TIP: You can also download updated owner's manuals to
load on the chartplotter from this web page.
3
Select GPSMAP Series with SD Card.
4
Select Download next to GPSMAP Series with SD Card.
5
Read and agree to the terms.
6
If you are on a Mac computer, select Go to Mac download
page.
7
Select Download.
8
If necessary, choose a location, and select Save.
9
Double-click the downloaded file.
10
If you are on a computer running Windows software, select
Next, select the drive associated with the memory card, and
select Next > Finish.
A Garmin folder containing the software update is created on
the memory card. The software update can take several
minutes to load onto the memory card.
11
If you are on a Mac computer, copy the Garmin folder to the
root directory of the memory card.
The software update can take several minutes to load onto
the memory card.
After loading the update onto the memory card, install the
software on the chartplotter
page
60).
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card
(Loading the New Software on a Memory Card,
page
60).
1
Turn on the chartplotter.
2
After the home screen appears, insert the memory card into
the card slot.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3
Follow the on-screen instructions.
4
Wait several minutes while the software update process
completes.
5
When prompted, leave the memory card in place and restart
the chartplotter manually.
6
Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
HDMI Out Video Considerations
To prevent corrosion due to moisture, you must use Garmin
GPSMAP accessory cables when connecting the chartplotter to
the video display. Using different cables voids your warranty.
Through the HDMI OUT port, you can duplicate the chartplotter
screen on another device, such as a television or monitor.
The Garmin GPSMAP HDMI accessory cable is 4.5 m (15 ft.)
long. If you need a longer cable, you should use an active HDMI
cable only. You need an HDMI coupler to connect the two HDMI
cables.
You must make all cable connections in a dry environment.
(Updating the Device Software,
NOTICE
Appendix
Advertisement
Table of Contents
