Labels On Product - Invacare FDX User Manual

CAUTION!
Damage to wheelchair caused by one-sided
loading on lifter pillar
– One-sided loading occurs if the seat is raised
and/or tilted. Always return your seat backrest
to the upright position and the seat tilting to
the horizontal position before ascending slopes.
Never subject the lifter pillar to continuous
single-sided loading. The raising and tilting
function of the seat only provides additional
rest positions.
Important information regarding speed reduction
with raised lifter
– If the lifter has been raised above a certain
point, the drive electronics considerably
reduces the speed of the wheelchair. If speed
reduction has been activated, drive mode can
only be used to carry out minor movements of
the wheelchair and not for regular driving. To
drive normally, lower the lifter until the speed
reduction has been deactivated again. See
chapter The Lifter for details.
1541361-N

2.7 Labels on product

Safety
19