Adjusting The Adaptable Backrest Padding - Invacare FDX User Manual

Invacare® FDX®
Width-Adjustable Backrest
• 6 mm Allen key
1. Loosen and remove upper backrest screw A on both
sides.
2. Adjust desired backrest angle in 3.8° steps.
Use scale B on backrest for this purpose. Ensure that
you set same angle on both sides.
3. Insert and tighten screw.
Ensure you insert screw through one of holes of
backrest bracket. Screw must be visible on inside of
bracket and screw head must be flush with bracket.
Simple Backrest
• 6 mm Allen key
46
Fig. 5-18
1. Loosen and remove middle backrest screw A on both
sides.
2. Adjust desired backrest angle in 7.5° steps.
Ensure that you set same angle on both sides.
3. Insert and tighten screw.

5.9.6 Adjusting the adaptable backrest padding

There are two ways of adapting the backrest padding.
• Using a snap buckle which is accessible without having
to remove the backrest cushion. Please see Method 1.
• With adjustment straps which are adjustable using
Velcro. Please see Method 2.
Method 1
Fig. 5-19
1541361-N