Ecoplus ZR9W-250T Instruction Manual page 26

.CONTROLLER INTRODUCTION
5 How to connect your heat pump to WIFI
#
5.1 1 Method :( one key set-up)
5.1.1 To install the"SmartLink3 Demo"APP on your Android phone.
5.1.2 APP Interface showed as followed:
"SSID": Input the available WIFI name，
"Password": Input the WIFI password.
5.1.3 Turn on the heat pump machine, and ensure your mobile phone is well connected to WIFI,
as during the set-up process, SSID address will be considered as default router SSID
address connected by mobile.( Notice: during the set-up process, please pay attention to
network that your mobile has connected, and ensure that heat pump machine is also in the
same network ,otherwise set-up may fail.)
5.1.4 Click on LED display screen from controller 1.2 WIFI , click "Connect" showed in below
picture:
Show network status
Show machine MAC
Initializtion
Set-up
23