Ecoplus ZR9W-250T Instruction Manual page 23

.CONTROLLER INTRODUCTION
2.3.4 Click
2.4 System settings
You need to input the right password to access the system setting，otherwise all the
parameters of 2.4 can not be changed
You can only access " System setting"
after entering the corect password,
otherwise you are not able to change
setting of parameters 2.4.
Please enter the password here.
Once correct password is entered, you
will access to 2.4 parameter interface.
EEV working mode
EEV target overheat temp.
Electric heater start delay time
Efficiency Alarm time
to access system setting
EEV manual step
2.3 Users water pump timing settings
Water pump timer on (Sunday)
12
Water pump timer off (Sunday)
17
2.4 System settings
Password
2.4 System settings
Date
Defrost circle
Temp. to access defrost
Temp. to exit defrost
Defrost time
EEV working mode
Show current setting data. You may
click to change this setting.
2.4 System settings
EEV target overheat temp
EEV manual steps
Electric heater start delay time
Efficiency Alarm time
20
BACK
:
01
:
10
BACK
BACK
MON 2015-04-05 08:22
40min
o
-7 C
o
13 C
8min
Auto
BACK
o
5 C
350S
2 hours
5 hours