Wiring Harness - Webasto D5W Z Manual

Galaxy

Wiring harness

To install the wiring harness
NOTE
The three grey relays (1, 2, 3) are technically identical!
- Release and expose the fuse/relay holder (5)
- Engage the relay sockets (1, 2, 3, 4) into the empty
slots in the fuse/relay holder (5)
NOTE
The order of the various relays depends on the
vehicle's equipment!
- Connect the black control relay K3.1 (4) to the red
relay socket
- Connect the three grey relays (1, 2, 3) to the black
relay socket
- Drill a 2.5 mm holder for the blade-type fuse holder
in the fuse/relay holder (1)
- Secure the mounting plate of the blade-type fuse
holder using a 3.5 x 13 mm self-tapping screw
- Attach the blade-type fuse holder to the mounting
plate
D5W Z heater upgrade
5
3
4
5
1
2
6
2
1
7