Matan Digital Printing Barak Series Technical Notes page 5

9. Wait for a couple of minutes and then drain the liquid
10. Repeat steps 7, 8 and 9, a couple of times (on the same
11. Screw back the plug and fill the tank with approx. ½ liter of
12. Thoroughly wash the inside of the MIT
13. Open the plug (be careful not to lose the red gasket,) and
14. Dry the inside of the tank using an air line, as shown
10100125 - A
through the drain hole, by unscrewing the drain plug
located on the bottom of the tank, as shown below.
Be careful not to lose the red gasket.
MIT).
alcohol.
pour out the alcohol.
below.
© Matan Digital Printers Ltd
Drain Hole
Page 5 of 19