Matan Digital Printing Barak Series Technical Notes page 3

Cleaning the Ink System
Cleaning the MIT
1. Disconnect the tubes from the MIT fittings as shown in
2. Remove the four retaining screws that hold the MIT and
Retaining Screws
3. Remove the tank from the printer.
4. Dispose the old ink according to your local environment
5. Remove the plastic or metal fittings, and dispose of them.
10100125 - A
Figure 1, page 3.
Figure 1: The Main Ink Tank's Fittings
keep them for later use.
You might find that the tank has stuck to the chassis,
because of spilt ink.
regulations.
© Matan Digital Printers Ltd Page 3 of 19