Matan Digital Printing Barak Series Technical Notes page 4

6. Thoroughly clean the two threaded fittings, both inside and
7. Pour approximately ½ liter of flushing fluid into the MIT
Figure 2:
8. Thoroughly wash the inside of the MIT, making sure that
10100125 - A
Plastic Fitting
out.
(Figure 2, page 4).
The flushing fluid must be compatible with the ink that is
being removed.
Be careful not to splash the liquid outside the tank and not
to turn it upside down, as it may damage the D
L S .
EVEL ENSOR
Pouring flushing fluid into the MIT
the corners are free of any residual ink.
© Matan Digital Printers Ltd
Threaded Fittings
I
IGITAL NK
Page 4 of 19