oticon Dynamo BTE13 SP Instructions For Use Manual page 26

The manufacturer declares that this
hearing aid is in compliance with the
essential requirements and other
relevant provisions of Directive
2014/53/EU (RED).
Waste from electronic
equipment must be
handled according to
local regulations.
50 About Start up Handling Options Warnings
Declaration of Conformity is available
from the manufacturer.
Manufactured by:
Denmark
More info
Description of symbols used in this booklet
Warnings
Text marked with a marking symbol must be read before using the product.
Manufacturer
The product is produced by the manufacturer whose name and address are stated
next to the symbol. Indicates the medical device manufacturer, as defined in EU
Directives 90/385/EEC, 93/42/EEC and 98/79/EC.
CE mark
The product complies with Medical Device Directive 93/42/EEC.
The four digits number indicates the identification of the notified body.
Electronic waste (WEEE)
Recycle your hearing aids, accessories or batteries according to local
regulations or return them to your hearing care professional for disposal.
Electronic equipment covered by Directive 2012/19/EU on waste and
electrical equipment (WEEE).
Regulatory Compliance Mark (RCM)
The product complies with electrical safety, EMC and radio spectrum requirements
for products supplied to the Australian or New Zealand market.
IP code
This symbol indicates the class of protections against harmful ingress of water
and particulate matter according to EN 60529.
IP5X indicates dust protection. IPX8 indicates the protection against the effects
of continuous immersion in water.
51