Appendix A: *.Ini File Details - Raymarine H6 System Installation Manual

Appendix A: *.ini file details

Introduction
This appendix gives details of the *.ini files that have to be modified during post
installation set up as detailed in
cam.ini
;Brightness and Contrast are from 0-511
;Camera names must be enclosed in inverted commas.
;Gamma is either 1 or 0
;For NTSC Cameras set PAL=0
;Cycle speed is the time (in Milliseconds) before the camera is
switched to the next one.
;The minimum setting for this value is 200
[General]
PAL=1
CycleSpeed=5000
[Camera0]
Active=1
Name="Docking"
Brightness=133
Contrast=300
Gamma=0
[Camera1]
Active=0
Name="Eng 1"
Brightness=106
Contrast=206
System set up page 43
on .
67