Table Of Contents; Safety Instructions - IKA KS 4000 i control Manual
Hide thumbs
Also See for KS 4000 i control:
- Operating instructions manual (85 pages) ,
- Operating instructions manual (84 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
Contents
EN
Safety instructions
• Read the operating instructions in full before starting up
and follow the safety instructions.
Kep the operating instructions in a place where they can be
accessed by everyone.
The media used in the appliance may result in danger spe-
cific to the media and the process. This applies, for exam-
ple, to shaking cultures with living cells and to aggressive
Page
or flammable media. Particulars as small estimated endan-
2
germents can become, if they arise with one another in
17
combination, a larger endangerment. This manual cannot
19
describe the dangers and resulting safety measures in
19
more detail.
19
This appliance should only be operated by suitably trained per-
19
sonnel familiar with the appliance and authorized to work in this
20
area.
20
21
• The machine may only be opened by trained specialists - even
21
during repairs. The machine is to be unplugged from the mains
21
before opening. Live parts inside the machine may still be live
22
for some time after unplugging from the mains.
22
• NOTE ! Covering or parts that are capable of being removed
22
from the unit without accessory equipment have to be reatta-
22
ched to the unit for safe operation in order to prevent, for
23
example, the ingress of fluids, foreign matter, etc. .
23
• Wear your personal protective equipment in accordance with
24
the hazard category of the medium to be processed.
24
Otherwise there is a risk of:
27
- splashing liquids
28
- projectile parts
30
- body parts, hair, clothing and jewellery getting caught.
30
• Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations.
• Beware of the high dead weight of the appliance when trans-
porting. Ensure that your fingers do not get crushed when set-
ting down the appliance.
• Always install the appliance on a flat, stable non-slip base.
• Pay attention to the vessels on the shaking table when setting
the shaking rate. This will prevent any of the medium to be
shaken from spurting out of the sample vessels.
17
Hide quick links:
Advertisement
Table of Contents
