First-Time Operation - Plantronics Habitat Soundscaping Installation Manual

Enclosed waterfall
Table of Contents

Advertisement

First-time operation

Double-check
valve position
Connect power
Check for leaks
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Enclosed Waterfall
Ensure the valves are in the following positions:
Valve
Drain valve
Primary control valve
Water pump valve
Fill valve
UV inlet valve
UV outlet valve
Connect all cables to standard US outlet or supplied power strip.
There are 3 cables with the optional lighting fixture, or 2 without it.
The waterfall and lighting fixture will power on.
1. Evaluate the waterfall and check for leaks.
2. If you notice any leaks, immediately disconnect power from the
waterfall.
3. Attempt to locate the source of the leak.
4. If the quick disconnect fittings above the spray bar are leaking,
tighten them.
5. If the leak is coming from elsewhere, call us at 847-679-6666.
QUICK DISCONNECTS FROM ABOVE
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669
Position
Closed (perpendicular to pipe)
Open (parallel to pipe)
Open (parallel to pipe)
Closed (perpendicular to pipe)
Open (parallel to pipe)
Open (parallel to pipe)
9

Advertisement

Table of Contents
loading

Table of Contents