Lighting Operation (Optional) - Plantronics Habitat Soundscaping Installation Manual

Lighting operation (optional)

Remote control
Select color or
program
Select brightness
Select Auto Run
mode
Select flash/
strobe effect
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Enclosed Waterfall
The optional lighting fixture is installed in the base, just below the
enclosed acrylic waterfall panel.
Your unit includes an infrared lighting remote control.
For best performance, stand close to the waterfall and aim the
remote control down towards the lighting fixture in the base.
Press PROG to go into color program select mode.
Press "+" or "-" to cycle through the 24 built-in programs (8 static
colors, 8 color dreaming modes and 8 color changing modes).
Presets
Press button 0 - 9 to choose a static color and the two built-in
programs:
0: black 5: yellow
1: red 6: purple
2: green 7: white
3: blue 8: color changing mode
4: cyan 9: color dreaming mode
Recommended presets
We recommend the following for office use:
color program
7: white
4: cyan
9: color dreaming mode
Press R/G/B and press "+" and "-" buttons to adjust the intensity of
the lighting.
Not recommended.
Press "AUTO RUN" to choose Auto Run/demo mode.
Press FLASH to turn on/off the flash for the Auto Run, and then
pressing "+" and "-" buttons to adjust flash speed. Press SPEED to
control the speed of the Auto Run, and then pressing "+" and "-"
buttons to adjust it.
Not recommended.
Press FLASH to turn on/off strobe effect and press "+" or "-" to
adjust the flash speed.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669
benefits
energize and focus
calm and productive
creativity and visual stimulation
aim remote control
down towards base
11