Table of Contents
Advertisement
Installation
Treat the water
Fill with distilled
water
CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING.
Enclosed Waterfall
1. Ensure the drain valve is closed (perpendicular to pipe).
2. Connect the fill insert spout and funnel (supplied) into the fill
valve.
3. Open the fill valve (parallel to pipe).
CAUTION
4. Pour one tablespoon of monopersulfate powdered water
treatment (provided with purchase) into the funnel, which will
dissolve as you add the distilled water. We recommend "Robelle
Oxidizing Shock & Swim Monopersulfate."
NOTE Treat water with 1 tablespoon monopersulfate every 6
months. See maintenance instructions on p. 15.
CAUTION Do not treat with any other additives or solutions
including chlorine, bromine, or cleaning solvents/solutions.
5. Using distilled water only, fill the panel until the water is 10 inches
from the bottom of the panel (5 inches above the base lid).
NOTE: The minimum water fill line indicator is located on the
clear acrylic panel near the water fill valve.
REQUIRED
Model #
Dimension
G048
4 x 8 ft.
G059/G060
5 x 9 ft. / 5 x 10 ft.
6. Close fill valve before removing funnel and insert. Have towels on
hand for any spills.
Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669
Drain
VIEW FROM REAR
Protect your waterfall and make sure to add the
water treatment before running for the first time.
Distilled water is required.
Do not use tap water or spring water.
Water
14 gallons distilled water
18 gallons distilled water
8
Advertisement
Table of Contents
