IBM 3270 Hardware User's Manual page 65

Filing the Option Booklets
If you have not already filed your option
booklets here, do that now. Be sure to put them
behind the correct instruction pages that follow.
As you add new options in the future, . be sure to
place the new option booklets behind the correct
instruction pages, also. You may also have
booklets for options that were installed in your
system unit at the factory; keep them.
Always Read the Instruction Pages First
Before you use any of the booklets to install or
set up any of the options, read the notes (for
example; about handling cards and switch
settings) on the instruction pages first.
When you are using your system with options
added, always check the insert booklets in this
step or the separate manuals first for information
you may need about an option. Be sure that you
refer to them for solving any problems that you
may have with the options.
What to Do after You Have Installed All
Your Options
After you have installed or set up all the options
that you have,
1.
Update the charts in the back of this manual.
2. Go back to "Step 4. Checking Out the 3270
PC with the Power-On Self Test" on
page 2-37, and rerun the POST.
2-48 Book
1 -
3270 PC Work Station User's Guide