9. Press 3, then Enter to select PREPARE
SYSTEM FOR RELOCATION. This step
moves the disk head over the highest
available cylinder.
10. The following message should appear.
The IBM 3270 Personal Computer
DIAGNOSTICS
Version x.xx Copyright IBM Corp. 19xx
SELECT AN OPTION
o -
RUN DIAGNOSTIC ROUTINES
1 - FORMAT DISKETTE
2 - COpy DISKETTE
3 - PREPARE SYSTEM FOR RELOCATION
9 - EXIT TO SYSTEM DISKETTE
ENTER THE ACTION DESIRED
73_
FIXED DISK(S) READY FOR SHIPPING
11.
Remove the Diagnostic Diskette from the
diskette drive and return it to the back of this
binder.
12. Set the On/Off (I/O) switches for all work
station components to Off
(0).
13. Continue with the next section, "Preparing
Your Diskette Drives" on page 4-5.
4-4
Book
1 -
3270 PC Work Station User's Guide