IBM 3270 Hardware User's Manual page 102

3. Now that you have backed up your fixed disk,
you are ready to prepare the fixed disk for the
move~
4. Get the Diagnostics diskette from the back of
this manual.
5. Insert it into drive A and push the load lever
down.
6. If your display has an On/Off (I/O) switch, set
the switch to On
(I).
7. If you have an expansion unit, turn it on.
8. Turn on the system unit.
The following panel should appear on your
screen.
The IBM 3270 Personal Computer
DIAGNOSTICS
Version x.xx Copyright INM Corp. 19xx
SELECT AN OPTION
o -
RUN DIAGNOSTIC ROUTINES
1 - FORMAT DISKETTE
2 - COpy DISKETTE
3 - PREPARE SYSTEM FOR RELOCATION
4 - EXIT TO SYSTEM DISKETTE
ENTER THE ACTION DESIRED
?
Chapter 4. Moving Your 3270 PC to a New Location 4-3