Removing Y our
~rinter
Refer to the option instructions that were
shipped with your printer for any special
instructions on removing your printer.
You should have inserted the Options Booklets
for your printer in "Step 5. Option Instructions"
on page 2-47.
Make sure that you remove the printer cable
from the system unit or expansion unit. The
printer cable is attached to the connector in slot
7 on the system unit.
If you are moving or shipping your entire work
station, continue with the next section "Final
Steps" on page 4-14.
Chapter 4. Moving Your 3270 PC to aNew Location
4-13