Table of Contents
Advertisement
2.
Remove the drain bottle and empty it to discard the discharged ink�
3.
Attach the emptied drain bottle to the machine once more�
4.
Close the panel cover�
5.
Press [ENTER]�
NOW EMPTY?
[YES]
NO
6.
Press [ ] or [ ] to select "YES�"
7.
Press [ENTER]�
NOTE
The "EMPTY DRAIN BOTTLE" message also disappears when you select "NO" and press [ENTER] without
discarding the discharged fluid.
If "EMPTY DRAIN BOTTLE" appears again, you should discard the discharged fluid, if you can. Repeatedly
selecting "NO" without discarding the discharged fluid may cause it to spill out of the drain bottle, soiling
your hands or the floor.
2
TEMP
Periodic Maintenance
Upper limit
Discard the discharged
fluid before this line is
passed.
3
Chapter 2 Maintenance
47
Advertisement
Table of Contents
