Table of Contents
Advertisement
Performing Advanced Setup of the Media
MEMO
If you want to use the print area specified here for the next printing operation, switch "SET AT SETUP" (p .
13) to "DISABLE . " With this setting, you can set up the media without setting the print area and base
position .
Specifying the minimum print area enables print time reductions
Set "FULL WIDTH S" to "PRTAREA" to narrow the width in which the print heads move, which reduces
the print time .
" "Reducing Output Time" (p . 30)
Example of good settings
The blank area in
the print area is
minimized .
This function is effective when the print area or output data has a small width .
When the laser pointer is difficult to see
Depending on the material used on the media, such as transparent media and high-gloss media with
dark color used on the print surface, the laser pointer may be difficult to see . In such cases, the laser
pointer may become more visible by placing masking tape on the print surface or on the back .
18
Chapter 1 Fully Utilizing the Machine
Example of bad settings
The print area
has a lot of
unnecessary
blank areas .
Advertisement
Table of Contents
