Cleaning And Care; Safety Lock; Overload And Overheating Protection - Panasonic MX-EX1011 Operating Instructions Manual

Blender jug prewash
Blender jug and mill blade
Wash each part in cold or lukewarm water with a soft sponge.
Rinse and dry thoroughly.
Storing
The safety lock has been designed to prevent the blender from
switching on when blender jug or mill container is not properly in place.

Overload and Overheating Protection

In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.
After rotation stops, follow the below steps:
1
2
Remove blender jug or mill container from motor housing.
Reduce the ingredients to less than half. (For blender jug, it also can add liquid.)
3
Reset the blender jug or mill container, start blending again.
If the appliance still does not operate after performing the above, overheating protection has been activated.
normal temperature) to release overheating protection before using again.

Cleaning and Care

Safety Lock

Other parts
Wash each part in cold or lukewarm water with a soft sponge.
Rinse and dry thoroughly.
Motor housing
Wipe motor housing with a well wrung-out cloth.
EN7