Using A 7720P Programming T~L - ADEMCO 7920SE Installation Instructions Manual

PROGRAMMING THE 7920SE
USING A 7720P PROGRAMMING TOOL
~
The 7720P is powered by the 7920SE and can be used to program the
7920SE, as well as be used to monitor FAST mode
distdavs.
Refer to the
CONNECTING A 7720P paragraph for connections. " -
Each key of the 7720P has two functions, normal and SHIFT as follows
KEY NORMAL KEY FUNCTION
SHl~ KEY FUNCTION
BSIESC [BS]: Press to delete entry [ESC]: Not used with 7920SE
[41 : Not used with 7920SE [~1 : Not used with 7920SE
NN
[Nl: Press for "NO" answer.
M: Press for "YES" answer
I
I Al~o used to d~play Node [ --
Table.
I
SHIH Press before pressing a SHIFT key function. Will light SHIFT LED.
LED goes out once a kev is messed. Must mess again for each
II
must
be held down while powering up or connecting to previously
cwwered
1'
I up 7920SE. No SHIFT function