Operations With The Mains Circuit Adapter - Pierenkemper PierenStim Parese Manual

Deleting basic settings and user programs
Switch off the device. Simultaneously press the P key and the left-hand
turn the device on
with the key. The
menu for changing
the basic settings will
be opened.
Deleting user
programs
As long as the device contains user programs, the display will show a U and a Clr.
Press the left-hand - key to delete the user program. The deletion procedure will be
confirmed with an acoustic signal and the text deleted.
Switching the signal transmitter ON and OFF
If you are irritated by the acoustic warning signal at every impulse during the
stimulation, this function can be de-activated. If the loudspeaker symbol is displayed
this means that the signal transmitter is active. To de-activate the acoustic signal
press the key. The loudspeaker symbol will disappear. To re-activate the signal
transmitter, press the
Switching the therapy session timer ON and OFF
Normally, each therapy session is automatically terminated by the device once
the therapy session time has elapsed. If the therapy session timer is active, a 30 is
displayed beneath the timer symbol. This function can be switched off by pressing
the right-hand
function can be switched on again by pressing the right-hand

Operations with the mains circuit adapter

The PierenStim Parese can be operated with the mains circuit adapter SNT 5-2400
as follows:
»
Take account of the operating instructions of the mains adapter.
»
Plug the mains adapter into the mains socket.
»
Plug the end of the cable into socket no. 6.
»
Further information can be found in chapter „Switching On The Device" of the
operating instructions.
key again.
key. Instead of the 30, two slashes are displayed. The timer
English
key and
key again.
39