Kinetico Undersink 7000 Package Contents Manual page 3

Kinetico drinking water filter with macguard

Hide thumbs Also See for Undersink 7000:

Table of Contents

Installation Instructions

Over tightening of any threaded fitting could result in damage to the fitting

Apply Teflon tape to the plastic male elbow (See Figure 2), and install it into the outlet on the right side of the filter

head/bracket assembly (See Figure 3).

Flow Control Elbow

Figure 2. Elbows

NOTE:

Model 7500 uses a Flow Control elbow to ensure your water has adequate contact time with the

carbon inside of the filter cartridge. Model 7000 uses a standard elbow.

Apply Teflon tape to the male end of the shutoff valve provided and install it into the inlet on the left side of the filter

head (See Figure 4). Hand tighten the valve until it is firmly in place.

Kinetico Incorporated ◆ Corporate Headquarters ◆ Newbury, Ohio 44065 ◆ (440) 564-9111

Rev.: 01/2011

Undersink Models 7000 and 7500

CAUTION

or the filter head.

Standard Elbow

Figure 4. Shutoff Valve Installation

Kinetico Drinking Water Filter

with MACguard

Figure 3. Elbow Installation

Product No. 9383H

Table of Contents

Need help?

Do you have a question about the Undersink 7000 and is the answer not in the manual?

Undersink 7500