Measurement Procedure - HoMedics LEADER LDRBPS-060 Manual

Note:
If it is not possible to fit the cuff to your left arm, it
can also be placed on your right arm. However, all
measurements should be made using the same arm.
To use on the right arm, you must position the artery
symbol " " over the main artery. Locate the main
artery by pressing with two fingers approximately 1"
(2 cm) above the bend
of your elbow on the
inside of your right arm.
Identify where the pulse
can be felt the strongest.
This is your main artery.
Main Artery
17

MEASUREMENT PROCEDURE

Important Notes:
• B lood pressure changes with every heartbeat and is
in constant fluctuation throughout the day.
• B lood pressure measurement can be affected by
the position of the user, his or her physiologic condi-
tion and other factors. For greatest accuracy, wait 1
hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking
to measure blood pressure.
• B efore measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
You should not be physically tired or exhausted
while taking a measurement.
• D uring the measurement, do not talk or move your
arm or hand muscles.
• S ee page 23 for additional notes regarding your
blood pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
18